Offroad Catalog
- Accessories
- ATV Tires & Wheels
- Body
- Brakes
- Chains
- Electrical
- Engine
- Bearing and Seal Kits & Crankcase Vents
- Big Bore Kits
- Camshafts
- Clutch & Cam Covers
- Clutch & Ignition Covers
- Clutch Baskets, Plates, Inner Hubs & Brackets
- Clutch Friction Plates, Springs & Disc Sets
- Connecting Rods
- Crankshaft & Engine Oil Seals
- Cylinder Sleeves
- Cylinders & Cylinder Kits
- Engine Valves, Seals, Shims & Cam Chain
- Flywheel Weights, Clutch & Water Pump Covers
- Gasket Kits & Oil Seals
- Hot Cams
- Magnetic Drain Plugs
- Main Bearing & Seal Kits
- Motor Mounts, Shift Drums & Crankcase Breathers
- Oil Coolers & Accessories
- Oil Filler Plugs, Caps & Dipsticks
- Oil Filters
- Oil Line Guard, Engine Heads & In-Line coolers
- Piston Kits
- Piston Kits, Rings, Wrist Pins & Circlips
- ProX Pistons
- Radiators, Caps & Holders
- Valve Seats, Locks, Guides & Spring Retainers
- Valve Shim Kits & Camshaft Install Kit
- Water Pump Cover & Impeller Kits
- Wiseco Pistons
- Exhaust
- Fuel Systems
- Graphics & Seats
- Handlebars & Controls
- Lubes
- Merchandising
- Sprockets
- Suspension
- Tire Accessories
- Tires
- Tools
- Trailer
- Tubes & Wheels
CYLINDER SLEEVES
Features
- Re-sleeve worn or seized cylinders with sleeves manufactured by L.A. Sleeve Co.
- An economical solution available for riders, racers and engine builders everywhere
- Centrifugal castings used in these sleeves are made from a carbon-chromemolybdenum alloy of 200 Brinell hardness, ensuring ease of installation, troublefree boring and a dependable, long-lasting engine
Images
Honda
| Part # | Description | Retail |
|---|---|---|
| H-5066 | FITS: CR80R 87-98, BORE (MM): 47, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $85.95 |
| 0931-0001 | FITS: CR85 03-04, BORE (MM): 47.5, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $85.95 |
| 0931-0082 | FITS: CR85 05-07, BORE (MM): 47.5, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $85.95 |
| 0931-0047 | FITS: CR125R 87-88, BORE (MM): 54 - CYLINDER SLEEVES | $92.95 |
| H-5075 | FITS: CR125R 89, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| H-5104 | FITS: CR125R 90-91, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| H-5249 | FITS: CR125R 93-95, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| H-5291 | FITS: CR125R 96-98, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| H5439 | FITS: CR125R 00, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| H5450 | FITS: CR125R 01, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| H5466 | FITS: CR125R 02, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| 0931-0002 | FITS: CR125 03, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| 0931-0059 | FITS: CR125 04, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| 0931-0153 | FITS: CR125R 05-07, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| H-5076 | FITS: CR250R 88-89, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| H-5105 | FITS: CR250R 90-91, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| H5178 | FITS: CR250R 92-93, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| H5198 | FITS: CR250R 94, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| H-5250 | FITS: CR250R 95-96, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| H-5318 | FITS: CR250R 97-98, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| H-5375 | FITS: CR250R 99-00, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| H5448 | FITS: CR250R 01, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| H5477 | FITS: CR250R 02-03, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| 0931-0152 | FITS: CR250R 04, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| 0931-0154 | FITS: CR250R 05-07, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| 0931-0054 | FITS: XR400R Big Bore 96-04 - CYLINDER SLEEVES | $86.95 |
| 0931-0155 | FITS: CRF450R/X 04-07, BORE (MM): 96, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $86.95 |
| H-5077 | FITS: CR500R 89-01, BORE (MM): 89, CYLINDER TYPE: Original barrel has a cast-in iron liner in the cylinder; liner must be bored out completely (do not try to push out the cast-in liner) - CYLINDER SLEEVES | $123.95 |
| 0931-0151 | FITS: X650L 93-08 - CYLINDER SLEEVES | $86.95 |
Kawasaki
| Part # | Description | Retail |
|---|---|---|
| KA-935 | FITS: KX60 84-98, BORE (MM): 43, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $67.95 |
| 0931-0003 | FITS: KX65 00-01, BORE (MM): 44.5, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $67.95 |
| 0931-0004 | FITS: KX65 02-07, BORE (MM): 44.5, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $67.95 |
| KA-5121 | FITS: KX80 91-94, BORE (MM): 48, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $85.95 |
| KA-5316 | FITS: KX80 95-97, BORE (MM): 48, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $85.95 |
| KA-5351 | FITS: KX80 98-00, BORE (MM): 48, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $85.95 |
| KA5449 | FITS: KX85 01-08, BORE (MM): 48.5, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $85.95 |
| KA-5263 | FITS: KX100 95-97, BORE (MM): 52.5, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $85.95 |
| 0931-0062 | FITS: KX100 98-05, BORE (MM): 52.5, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $85.95 |
| 0931-0160 | FITS: KX100 06-07, BORE (MM): 52.5, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $85.95 |
| KA-5107 | FITS: KX125 90-91, BORE (MM): 56, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| KA5154 | FITS: KX125 92, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| KA-5179 | FITS: KX125 93, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| KA5208 | FITS: KX125 94, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| KA5251 | FITS: KX125 95, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| KA5307 | FITS: KX125 96-97, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| KA5354 | FITS: KX125 98-99, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| KA-5429 | FITS: KX125 00, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| KA5451 | FITS: KX125 01, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| KA5473 | FITS: KX125 02, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| 0931-0005 | FITS: KX125 03, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| 0931-0157 | FITS: KX125 04-05, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| KA-5086 | FITS: KDX200 89, BORE (MM): 66, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $97.95 |
| KA5252 | FITS: KDX200 95-06, BORE (MM): 66, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $97.95 |
| 0931-0083 | FITS: KDX220 97-05, BORE (MM): 69, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $97.95 |
| KA-5079 | FITS: KDX250 91-94, BORE (MM): 67.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| 0931-0156 | FITS: KX250 87, KX250F 87-88, BORE (MM): 67.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $107.95 |
| KA-5153 | FITS: KX250 92, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| KA5180 | FITS: KX250 93, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| KA5253 | FITS: KX250 95, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| KA5321 | FITS: KX250 97, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| KA5350 | FITS: KX250 98-99, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| KA-5422 | FITS: KX250 00, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| KA5481 | FITS: KX250 01, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| KA5471 | FITS: KX250 02-03, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| 0931-0064 | FITS: KX250 04, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| 0931-0158 | FITS: KX250 05-07, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| 0931-0063 | FITS: KX250F 04-05, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $75.95 |
| 0931-0084 | FITS: KLX300 97-07, BORE (MM): 78, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $67.95 |
| KA-5087X | FITS: KX500 89-04, BORE (MM): 86, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
KTM
| Part # | Description | Retail |
|---|---|---|
| 0931-0042 | FITS: 65 SX 03-07 - CYLINDER SLEEVES | $85.95 |
| 0931-0031 | FITS: 125 SX/E/XC 99-00 - CYLINDER SLEEVES | $113.95 |
| 0931-0035 | FITS: 520 SX/E/M/XC 00-08 - CYLINDER SLEEVES | $105.95 |
| 0931-0035 | FITS: 525 SX/M/XC 03-08 - CYLINDER SLEEVES | $105.95 |
Suzuki
| Part # | Description | Retail |
|---|---|---|
| KA-935 | FITS: RM60 03, BORE (MM): 43, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $67.95 |
| 0931-0004 | FITS: RM65 03-06, BORE (MM): 44.5, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $67.95 |
| FL-5140 | FITS: RM80 91-01, BORE (MM): 47.5 - CYLINDER SLEEVES | $85.95 |
| 0931-0039 | FITS: RM85 02-07 - CYLINDER SLEEVES | $85.95 |
| 0931-0062 | FITS: RM100 03 - CYLINDER SLEEVES | $85.95 |
| FL-5108 | FITS: RM125 91-92, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| FL-5181 | FITS: RM125 93, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| FL-5255 | FITS: RM125 94-96, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| FL-5323 | FITS: RM125 97, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $90.95 |
| FL5346 | FITS: RM125 98-99, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $90.95 |
| FL-5420 | FITS: RM125 00-03, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $90.95 |
| 0931-0040 | FITS: RM125 04-07, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| FL-5093 | FITS: RM250 89-90, BORE (MM): 67, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $113.95 |
| FL-5182 | FITS: RM250 91-93, BORE (MM): 67, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $113.95 |
| FL5295 | FITS: RM250 96, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $117.95 |
| FL5357 | FITS: RM250 98, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $117.95 |
| FL5419 | FITS: RM250 00, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $117.95 |
| FL5465 | FITS: RM250 01, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $117.95 |
| FL5474 | FITS: RM250 02, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $117.95 |
| 0931-0147 | FITS: RM250 03, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| 0931-0148 | FITS: RM250 04-05, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| 0931-0150 | FITS: RM250 06-07, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $119.95 |
| FL5271 | FITS: RMX250 93-98, BORE (MM): 67, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $113.95 |
| 0931-0063 | FITS: RM-Z250 04-06 - CYLINDER SLEEVES | $75.95 |
Yamaha
| Part # | Description | Retail |
|---|---|---|
| YA-5183 | FITS: YZ80 93-01, BORE (MM): 47, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $85.95 |
| YA5476 | FITS: YZ85 02-07, BORE (MM): 47.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $85.95 |
| YA-5094 | FITS: YZ125 89, BORE (MM): 56, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| YA-5120 | FITS: YZ125 90, BORE (MM): 56, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| YA5184 | FITS: YZ125 93, BORE (MM): 56, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| YA-5257 | FITS: YZ125 94-95, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| YA-5348 | FITS: YZ125 96-98, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| YA-5378 | FITS: YZ125 99-01, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| YA5470 | FITS: YZ125 02, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| 0931-0007 | FITS: YZ125 03, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| 0931-0161 | FITS: YZ125 04-08, BORE (MM): 54, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $92.95 |
| YA-5258 | FITS: WR250 94-97, BORE (MM): 68, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $123.95 |
| 0931-0069 | FITS: YZ/WR250 89, BORE (MM): 68, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $123.95 |
| YA-5258 | FITS: YZ250 94-95, BORE (MM): 68, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $123.95 |
| YA5296 | FITS: YZ250 96, BORE (MM): 68, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $123.95 |
| YA-5377 | FITS: YZ250 99-07, BORE (MM): 66.4, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $123.95 |
| 0931-0011 | FITS: WR426F 01-02 (4-stroke), BORE (MM): 95, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $85.95 |
| 0931-0011 | FITS: YZ426F 00-02 (4-stroke), BORE (MM): 95, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $85.95 |
| 0931-0070 | FITS: YZ/WR450F 03-05 - CYLINDER SLEEVES | $89.95 |
| 0931-0162 | FITS: YZ450F 06-08, BORE (MM): 95, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $86.95 |
| YA-814 | FITS: TT600 83-96, BORE (MM): 95, CYLINDER TYPE: Original cylinder bore is alloy-chrome plated, nikasil, or electrofused; cylinder must be bored to accept new sleeve - CYLINDER SLEEVES | $81.95 |
This item appears on page 713 of the OffRoad Catalog